|
|
 |
How should you use a vertical hitch?
How should you use a turning hitch?
How should you use choker hitches?
How should you use basket hitches?
How should you use bridle hitches?
How does the angle of hoisting affects a sling load limit?
How should you use a vertical hitch? - In most cases use more than one sling. A single rope sling load tends to rotate in a twisting action that unwinds cables causing them to weaken.
- Do not use for lifting loose materials, long or unbalanced loads.
| 
|
How should you use a turning hitch? - Use a doubled choker to turn loads.
- Place both sling eyes on top of the load pointing in the direction opposite to the direction of the turn. This sling will remain tight while the load is turning.
- Never use a basket hitch to turn a load.
| 
|
How should you use choker hitches? Choker hitch - The sling tightens on a load as it is lifted.
- Do not use on loose bundles.
- Use choker hitches at 75% or less of rated sling capacity.
| 
| Doubled choker hitch - Provides more contact area to secure a load.
| 
| Double Wrap Choker Hitch - This hitch compresses the load and prevents it from slipping out of the sling.
- Where overhead space is limited, a double wrapped choker hitch is acceptable.
| 
|
How should you use basket hitches? Basket hitches - Provide relatively good control and eliminate the tendency of the load to twist, compared with a vertical hitch.
- Do not use on a load that is difficult to balance.
| 
| Double basket hitches - Balance loads by keeping slings apart.
- Prevent sling slippage by keeping the angle between the load and sling 60° or more.
| 
| Double Wrap Basket Hitches - Provide more contact for handling loose material and pipe.
- Tend to draw the load together.
| 
|
How should you use bridle hitches? Bridle hitches - Are made of 2, 3 or 4 single leg hitches.
- Are used for hoisting an object that has lifting lugs or attachments.
- Position the hook over the centre of gravity of the load.
- Adjust sling leg lengths with turnbuckles to level raised load.
- Check each sling leg angle to ensure sling is not overloaded.
| 
|
How does the angle of hoisting affects a sling load limit? - The angle affects the working load limit. The smaller the angle, the less load a sling can carry.
 |
Document last updated on April 14, 1998
Copyright ©1997-2008 Canadian Centre for Occupational Health & Safety
|
|
OSH Answers Lists
