Canadian Flag Canadian Centre for Occupational Health and Safety Centre canadien d'hygiène et de sécurité au travail Government of Canada Wordmark
CCOHS: Canadian Centre for Occupational Health and Safety
Français Contact Us Help
        
Canada Site
Web Info Service Products & Services OSH Answers Education & Training
Canada's national Occupational Health & Safety Resource
Home About Us E-News Bringing Health to Work Events Resources
OSH Answers Lists
What's New!
Subject Categories
Materials Handling
Chain Slings
Crane and Hoist Hand Signals
Crane Hitches
Crane Maintenance
Crane Pre-operation Inspection
Hoist Wire Rope
Lifting With Eye Bolts
Overhead Crane Operation
Plate Clamp Inspection and Use
Slinging on Overhead Crane Hooks
Synthetic Web Slings
Use of Materials Hoists
Use of Shackles
Wire Rope Slings
More Information
About OSH Answers
Feedback
Disclaimer
Inquiries Service

The Inquiries Service at CCOHS answers questions on the health or safety concerns people have about the work they do.

About the Inquiries Service
Ask a Question

Crane and Hoist Hand Signals

When should the crane operator follow hand signals?
Who can give the hand signals? or Who can be a signaler?
What should you do when in charge of signaling?
What are examples of some common hand signals?
What are some common hand signals for crawler, truck and locomotive cranes?
What are some signals for crawler cranes only?


When should the crane operator follow hand signals?

A crane operator should always move loads according to the established code of signals, and use a signaler. Hand signals are preferred and commonly used.

Who can give the hand signals? or Who can be a signaler?

  • a person qualified to give crane signals to the operator,
  • there should be only one designated signaler at a time,
  • if signalers are changing between each other, the one in charge should wear a clearly visible badge of authority,
  • a crane operator should move loads only on signals from one signaler,
  • a crane operator must obey STOP signals no matter who gives it.
What should you do when in charge of signaling?

The signaler must:

  • be in clear view of the crane operator,
  • have a clear view of the load and the equipment,
  • keep persons outside the crane's operating area,
  • never direct a load over a person.
What are examples of some common hand signals?

Hoist: With forearm vertical, forefinger pointing up, move the hand in a small horizontal circle.

Lower: With an arm extended downward, forefinger pointing down, move the hand in small horizontal circles.

Multiple Trolleys: Hold up one finger for block marked "1" and two fingers for a block marked "2." Regular signals follow.

Hoise
Hoist

Lower
Lower

Multiple Trolleys
Multiple Trolleys

Bridge Travel: Arm extended forward, hand open and slightly raised, make a pushing motion in direction of travel.

Trolley Travel: Palm up, fingers closed, thumb pointing in direction of motion, jerk the hand horizontally.

Stop: Arm extended, palm down, hold the position rigidly.

Bridge Travel
Bridge Travel

Trolley Travel
Trolley Travel

Stop
Stop

Emergency Stop: Arm extended, palm down, move the hand rapidly right and left.

Magnet Is Disconnected! : Crane operator spreads both hands apart, palms up.

Dog Everything: Clasp hands in front of the body. Means PAUSE. This signal can be used on potentially risky occasions such as when it has started raining, when the load doesn't fit the space for which it was planned, or when a bystander gets too close to the action.

Emergency Stop
Emergency Stop

Magnet is Disconnected!
Magnet is Disconnected!

Dog Everything
Dog Everything
What are some common hand signals for crawler, truck and locomotive cranes?

Use Main Hoist: Tap fists on head; then use regular signals.

Use Whip Line (Auxiliary Hoist): Tap elbows with one hand; then use regular signals.

Raise Boom: Arm extended, fingers closed, thumb pointing upward.

Lower Boom: Arm extended, fingers closed, thumb pointing downward.

Swing: Point with a finger in direction of swing of a boom.

Use Main Hoist
Use Main Hoist

Use Whip Line
Use Whip Line

Raise Boom;  Lower Boom; Swing
Raise Boom; Lower Boom; Swing

Raise the Boom and Lower the Load: Arm extended, fingers closed, thumb pointing upward, other arm bent slightly with forefinger pointing down and rotate hand in horizontal circles.

Lower the Boom and Raise the Load: Arm extended, fingers closed, thumb pointing downward, other arm with forearm vertical, forefinger pointing upward and rotate the hand in horizontal circles.

Move Slowly: Use one hand to give any motion signal and place the other hand motionless in front of the hand giving the motion signal. (Hoist Slowly shown as example.)

Raise the Boom and Lower the Load
Raise the Boom and Lower the Load

Lower the Boom and Raise the Load
Lower the Boom and Raise the Load

Move Slowly
Move Slowly

Retract Boom (Telescoping Booms): Both fists in front of body with thumbs pointing toward each other.

Extend Boom (Telescoping Booms): Both fists in front of body with thumbs pointing outward.

Retract Boom
Retract Boom

Extend Boom
Extend Boom

What are some signals for crawler cranes only?

Lock Track: this side as indicated by raised fist.

Turn Travel Track: this side in direction shown by revolving fist.

Travel Both Tracks: forward or backward by revolving fists.

Lock Track - Turn Travel Track
Lock Track
Turn Travel Track

Travel Both Tracks
Travel Both Tracks

Document last updated on January 4, 2008

Copyright ©1997-2008 Canadian Centre for Occupational Health & Safety


Important Notices and Disclaimers
©CCOHS, 2008
Technical Support
 
Client Services
Products & services info
Inquiries Service
Answers to workplace questions
Webmaster
Website feedback